USR-S | Ultrasound Cleaning System for process liquid analytical sensors

Features and typical applications
Description
Technical data
Downloads

Long-term stable sensor filtration with ultrasound cleaning & cross-flow filter configuration for liquid analytical sensors – USR-S

Typical Applications

  • Long-term stable sensor cleaning for use with process water analyzers
  • Sampling for analyzers such as conductivity, pH, dissolved O2, turbidity, etc.
  • Process water with high corrosion potential and degree of contamination
  • Defined and constant cleaning

Key Features

  • Cross-flow vessel for up to 3 process liquid analytical sensors
  • Automatic ultrasonic irradiation of the sensor vessel
  • Sensor connections for diverse process liquid sensors
  • Corrosion resistant transducer membrane made of Hastelloy®
  • Control unit housed in a water-protected, wall-mounted enclosure

Description

On-line water analysis often places heavy demands on components of analyzer systems. This applies also to process liquid analytical sensors such as pH electrodes, conductivity sensors or sensors for dissolved oxygen and turbidity, which require a high availability in conjunction with low maintenance.

The ultrasound cleaning system manufactured by LFE for this purpose helps meet these requirements. The sensors mounted in a cross-flow vessel are irradiated at adjustable, regular intervals and defined duration by ultrasonic energy. The ultrasound generator creates cavitation bubbles in the water sample which serves as the coupling medium. The implosions of a tremendous number of micro cavitation bubbles results in the familiar excellent cleaning effect. The particles loosened from the sensors are carried away by the sample stream.

LFE's ultrasound cleaning system consists of the sensor vessel with the ultrasonic transducer and a separate control unit with the time controlled and remote controlled ultrasound generator. The control unit is housed in a water-protected (IP65) wall-mounted enclosure.

 

Features

  • Cross-flow vessel made of PVDF (optionally PVDF) for up to 3 process liquid analytical sensors
  • Ultrasonic irradiation - time controlled via timer or remote controlled via digital inputs
  • Process water connections: G ½” female (other connections on request)
  • High sensor service life
  • High corrosion resistance of transducer membrane made of Hastelloy®
  • Control unit housed in a water-protected, wall-mounted enclosure

Ultrasound cleaning system with flow-through vessel for process liquid sensors such as pH, EC, TOC, dissolved O2 – USR-S

Technical Data

Technical specifications subject to change without notice

Ultrasound module –Sensor cleaner
Housing Ultrasound module / sensor vessel assembly:
Wall-mounted, stainless steel housing with Hastelloy® transducer diaphragm
Flow-through vessel: PVC (optional PVDF) for up to 3 process liquid analytical sensors: 3x PG13.5 or optionally 2x PG13.5 & 1x G1"
Dimensions see dimensional diagram below
Weight 1.5 kg
Protection class IP65
Connecting cable Cable btwn. control unit and ultrasound module assembly: approx. 3 m
Ambient temperature +10°C - +35°C
Ultrasound generator – Control unit
Housing Synthetic housing with viewing pane; wall-mounted
Dimensions see dimensional diagram below
Weight 6 kg
Protection class IP65
Power supply 190-240 VAC / 50-60 Hz / 80 VA max. (other voltages on request)
Ultrasound frequency approx. 35 kHz
Ultrasound irradiation duration internal timer: irradiation and pause duration adjustable
remote control: via digital inputs
Ambient temperature +10°C - +35°C

 

Dimensions

USR-S Ultrasound Cleaning System for process liquid analytical sensors

 

USR-S Ultrasound Cleaning System for process liquid analytical sensors

Downloads  EN

USR-S | Ultrasonic Sensor Cleaning System

General information

Product overview

Technical specifications subject to change without notice

Go to top